9237 Ventilation grille CUN
(200x200mm)
*Prices are available only to registered users. After creating an account send us a request to display prices at the following link.
| Weight | 360 g |
|---|---|
| Dimenzije | 200 × 200 mm |
| Color/Material: | Galvanized-HV sheet metal |
| No. of pieces in the box | 6 |
Purpose and characteristics
This model of ventilation grills is intended for installation at the ends of the ventilation ducts.
It is used for installation in residential, commercial and small industrial premises
The slats are made of sheet metal with a thickness of 0.3 mm. The movable slats open when the air flows through the louver. When the air flow stops, the slats close and prevent air flow in the opposite direction.
It is used for mounting on the external wall (facade)
Production
It is used to make the frame. cold-rolled sheet metal in standard EN-DC 04, AISI-G1008, GOST1050-08Yu 0.5mm thick and subsequently surface protected
The slats are made of of prochromic, non-magnetic, acid-resistant sheet in standard EN-X5CrNi18-10, AISI-304, GOST1050-07H18N10, thickness 0.3 mm
The editorial is made of cold-rolled sheet metal in standard EN-DC 04, AISI-G1008, GOST1050-08Yu 0.5 mm thick and subsequently surface protected
Surface protection
The surface protection applied to this product is:
Plasticization: This process involves applying a layer of paint that provides excellent protection for aluminum parts. The surface of the product is smooth and shiny (>80%), and the protective layer with a thickness of 60-80 μm is resistant to temperatures from -40ºC to +200ºC. Standard colors are white and brown, but it is possible to order other colors upon special request.
Installation method
There are several ways of installing this type of grating:
1. By means of a screw connection through the opening on the grid body
2. Pipe mounting
3. Installation by means of mortar or some other binding agent
The entire production process is covered by certificate AT-06086/0
English 
Serbian 
German