The wall grille with movable slats is used to supply and remove air in ventilation, air conditioning or heating systems.
Independently manually movable slats in one row are installed in the grid frame. By turning the slats, the direction of the air flow is adjusted.
The wall grid is installed on the wall or on suspended ceilings, in small, medium or large rooms (pantries, bathrooms, apartments, department stores, restaurants, conference rooms, etc.)
The shape of the grid enables easy fitting into the high demands of the interior, and at the same time a large air exchange capacity without noise and turbulence. Air flow is enabled in 1 or 2 directions, in order to quickly mix the air wave with the air in the room.
Air flow is enabled in 1 or 2 directions, in order to quickly mix the air wave with the air in the room.
A flow regulator with oppositely directed vanes and a joint drive (damper) is installed on the wall grate. The “RP” flow regulator is used in various air systems to change the air volume or air pressure. It is possible to control the air flow on the regulator itself by manual adjustment through the ceiling grill. For the needs of the market, it is possible to install an electroregulator.
The table shows the nominal installation dimensions of the wall grid.
The ratio of width and height is possible in all combinations. According to the needs of the market, we also make wall grids in non-table dimensions.
The wall grid is made of aluminum Al.6060, and the profiles are obtained by cold extrusion.
The flow regulator is made of aluminum Al.6060, and the profiles are obtained by cold extrusion.
The surface protection applied to this product is:
– anodizing: This electrochemical process achieves excellent aluminum protection. Anodized parts have a high gloss (>80%). Anodizing produces a protective layer with a thickness of 8-12μm, stable in the temperature range -40ºC to +300ºC. Standard products are made in the natural color of aluminum (other colors are available on special request).
– plasticization: High-quality protection of aluminum parts is achieved with a paint coating. The product has a smooth and shiny surface (>80%). By plasticizing, a protective layer with a thickness of 60-80 μm is obtained, stable in the temperature range -40ºC to +200ºC.
Standard products are made in white and brown (on special request, other colors are possible).
The installation of the wall grid is safe and simple, and is done by means of a screw connection through the opening on the body of the grid, and according to the project documentation that is provided for the building where the installation is carried out.
The entire production process is covered by certificate AT-06086/0